Engraving Bits,Cutting Blade,CNC cutting tools,CNC end mill,special design carbide tools,one flute spiral bits,two flute spiral tools ,plotter blade ,end mill ,guangzhou CNC tools

Language | 加入收藏 | 设为首页

acrylic_cutter

one_flute_spiral_bits_A
one_flute_spiral_cutter_AA
one_flute_spiral_tools_AAA

Advertising_CNC_tools

GA-V_sharp_tools
GB-flat_botton_engraving_bits
GC-tapered_ball_nose_bits
GD-Single_flute_straight_bits
GE-Two_flute_straight_bits
GF-Radius_engraving_Bits
GG-Half_straight_bits
GH(AAA)-one_flute_spiral_tool_AAA
GH-One_flute_spiral_endmill
GI-Acrylic_cutter_tool
GJ-two_flute_spiral_bits
GK-Three_flute_spiral_bits
GL-One_flute_straight_cutter
GM-Two_flute_straight_cutter
GN-Two_flute_straight_tools
GO-Ball_nose_bit
GP-Ball_Nose_straight_Bits
GQ-Down_Cutter
GR-Two_spiral_down_bits
GS-Up_down_two_spiral_bits
GT-Up_down_one_spiral_bits
GU-Two_straight_flat_botton_engraving_bits
GV-3D_Vsharp_bits
GW-Cleaning_bits
GX-Tip_engraving_bits
GY-Radius_engraving_tools
GZ-non_standard
GZ2-Opening_knife
GZ3-Lace_knife
GZ4-Clear_arc_knife
GZ16_Taper_End_Mill
GZ6_Rough_Milling_Cutter
GZ5- Tapered_Ball_End_Mill_With_Coating
GZ1- Mini_Cutter_End_Mills

Bead_bits_and_barrel_bits

Bead_bits
Stupa_Bits
Barrel_bits
Gourd_bits
Bead_bits_Spare_parts
clearing_bit_with_drill_bit
Stupa_Tool
Solid_blade_beads
No_drill_beads_knife
Eagle_hook_lock
Abacus_beads_knife
Buddhism_knife
Septum_knife

LCD_lens_bits

JA-One_flute_cutter
JB-Two_flute_straight_endmill
JC-Two_flute_spiral_cutter
JD-One Sprial Strainght Cutter
JE-Two_flute_edges_cutter

PCB_drill_bits

XA-Drill_bits
XB-PCB_cutting_tools
XC-Angle Milling Cutters
XD-Left_helical_cutter
XE-Gong_bits

Metal_cutting_tools

MA-Two_flute_endmill
MB-four_flute_endmill
MC-Two_flute_ball_nose_endmill
MD-Ball_nose_Cutter
ME-Solid_carbide_endmill
MF-Ball_nose_endmill
MG-Single_flute_engraving_cutter
MH-Three_face_engraving_bits
MI-Drill_Bits

Aluminum_tools

LA-Aluminum_cutter
LB-Aluminum_engraving_tools
LC-One_flute_aluminum_bits
LE- two_flute_cutter
杰峰雕刻刀具营业执照
杰峰雕刻刀具联系方式
TEL :86-020-86003046
            86-020-86000892
            86-020-28926812
            86-020-38075105
FAX :86-020-38075383
            86-020-85673122
MOBILE:13710056861
ADD:512, NO.4 Zhujie Road,Tianhe,Guangzhou City,Guangdong Province,China

6*90degree*0.2 mm SHK End Diamond Cutter,CNC Router Bits,Stone Engraving Tools,Durable in Marble 3D Relief

1. Suitable Materials:

Professional PCD diamond tools for hard stone materials, such as hard granite, black marble, ceramic tiles, jade, agates, glass, tombstone, brick, grave monument, and so on.

2. Wide Application:

§ V-shaped small letters carving;

§ 3D embossment, such as concave-convex and decorative pattern;

§ Make beautiful lines engraving;

§ 2D engraving, end milling, grooving, etc. 

 

3. PCD Tools Advantages:

(1) Good sharpness, very high accuracy and efficiency;

(2) Big hardness and strength, good wear resistance;

(3) Smooth finished surface, no mark and damage to the cutting edge;

(4) Tool nose has good chip-removal performance;

(5) Stable quality, the first choice of all kinds of cnc router machines!

5. Demands to CNC router machine:

(1) Motor power should be more than 2KW;

(2) Spindle rotate speed: about 20000-24000 RPM;

(3) Keep sufficient water between tool tip and stone materials;

(4) Try to use stone machine or cnc router with good rigidity.

 

6. Operation Precautions:

(1) While programming, must guarantee the flexible feeding each time;

(2) Tool-tip should touch with stone materials while rotating; 

(3) Handle with care;

(4) The tool life is highly related with feeding speed.

The harder stone materials, requires the slower feeding speed.

(5)Size: 6*90degree*0.2mm

 

针对刀具加工过程要注意的一些细节和问题,杰峰刀具给您几点小意见和解决方法:


1.使用时单刃刀具声音大
单刃刀具在结构上来说,因只有一边有刃,加工效率上要稍微低点。解决方法:适当降低旋转速度,检查夹头内是否有异物或固定装置有无问题。

2.刀具寿命短
原因1:使用刀具跟机器本身设定不符,需调整机器参数。
原因2: 加工材质过硬。解决方法:建议使用刀具材料较好的进口刀具。

3.刀具振动
刀具重心偏移,转动时的离心力变大,导致转动时振动。解决方法:降低夹头夹刀位置(即要尽量缩短夹头底部露出的刀头长度)。机器主轴夹头抓刀不稳(没有夹牢),产生振动。

4.加工面不光滑、白边、抖纹
原因1: 刀刃磨损过快,变得不锋利(出现白边)。
原因2 :加工件没固定好。(出现白边,抖纹)解决方法:检查加工件和刀具固定情况,重新装夹。
原因3:旋转速度与移动速度不符(一开始便出现白边)解决方法:调整转速跟移动速度比率。
原因4:刀具类型选择不对,不同材料因根据材料的特性选择不同的刀具。

5.崩刃
原因1:加工件有异物解决方法:检查加工件的材质含量,加工件表面有无其它物件。
原因2:加工工件没固定好,抖动很大。解决方法:检查加工件固定情况,如有问题重新固定原因。

6.断刀
原因1:移动速度过快导致横向冲力过高。解决方法:适当降低移动速度(推荐)如果不改变移动速度,就适当提高旋转速度。
原因2 :移动速度正常,但旋转速度过低。解决方法:适当提高旋转速度(一般转速在18000-24000之间)。
原因3 :刀具刃径过细,容易断。解决方法:开始加工时,最慢速(移动速度)开始然后逐步提升最终移动速度也不宜过快。

7.排屑不好
原因1:旋转速度与移动速度不符。解决方法:适当调整机器速度设定。
原因2:刀具类型与所加工材质特性不符。解决方法:改用其它类型刀具测试。
原因3:刀具已经磨损。解决方法:刀具使用时间过长或磨损,更换新的刀具。

注明:
1.精细文字图案雕刻时应选用小角度、小刀尖刀具,大文字图案雕刻时在不影响精度要求的情况下尽量选用大角度、大刀尖,雕刻刀加工路径设计时,尽量选用刀具角度和刀尖最大化以提高雕刻效率。雕刻材质较硬材质角度应大,刀尖宜大。
2.小功率的主轴电机(夹具较小的)宜选用小柄刀具(3.175毫米、4.0毫米)走刀速度不应太快,在高速铣削中保持最小的阻力,获得最佳切割效果,大功率电机可以选用大柄径刀具来提高雕刻速度。
3.刀具刃长的选择应是,在加工板材厚度上加2-3MM为最合适的刀具刃长。切割压克力电机转速在18000—24000转/分,刀具刃长过长不宜用来加工较硬材质。
4.频繁断刀,除了跟刀具质量有关系。还跟你的雕刻设置习惯,雕刻机导轨电机精度,板材,以及夹具等有关.



Plotter_blade_and_holder

RO-Roland_blade
RO(A)-Roland_blade(A)
MI-Mimaki_blade_and_holder
MI(A)- Mimaki_blade_A
PC-Pcut_blade_and_holder
PC(A)-Pcut_blade_A
GT15-15U_Grapthec_blade_and_holder
GT15(A)-15U_Grapthec_blade_A
GT09-09U_Grapthec_blade_and_holder
GT09(A)-09U_pthec_blade_A
SG-Summa_blade_and_holder
SG(A)-Summa_blade_A
BR-Big_roland_blade_and_holder
LO-Ioline_blade_and_holde
RH-Speical_Roland_blade
CB- CraftRobo_blade
MU-Mutoh_blade
Anna_Blade_Cutting
GCC-Holder
PE- pen

Marble_Tools

Stone_PCD
Stone_knife2
Stone_knife1

Diamond_tools

DA-Diamond-engraving_bits
DB-Diamond_Radius_engraving_bits
DC-3D_engraving_bits
DD- Four_edges_engraving_bits
DE-Bas_relief_engraving_bits
DF-Marble_cutting_bits
DG-3D_Granite_bits
DH-PCD_bits
DI-diamond_bits
DJ-diamond_engraving_bits
DK-Granite_engraving_bits
DL-Cutting_tools
DM-Marble_bits
DN-PCD_ball_nose_bits
DO-Diamond_cutter
DP-pcd_wood
DQ-pcd_Acrylic

Wood_bits

WA-TCT_straight_bits
WB-Straight_bits
WD-wood_Round
pcd_wood2
Woodworking_Tool_Box
wood2_bits

Woodworking standard knife gong

A-Straight drilling cutting tools
B-Trimming knives with bearing
C-Without bearing for guiding trimming knives
D-Straight drill form class
E-Knife round bottom line
F-Convex half circular knife
G-Arch arc knife types
H-Classical linear decorative knives
I-Beaded Curve Knife
J-Crown curve decoration knives
K-Architectural decorative knives streamlined
L-Rail line/line Knife
M-Combination of high handrail Knife Bottle
N-Polymorphic classical Knife
O-Knife nail-like model lines
P-T-tenon Knife
Q-T-tenon cutter combination of class
R-Door Knife
T-Solid Carbide cutting knives
U-Other series
Saw

ER_Collect_nuts

clamp
nut
starepart
carbide

grinder

JF20A
Copyright © 2010 jeefoo.com Inc. All Rights Reserved 杰峰(JEEFOO)雕刻刀具 版权所有
杰峰雕刻刀具 粤ICP备12044779号-1